Solved

Hi everbody,I want to generate an integer parameter that contain whole data from the table in one line, where the values for the same row are sparated by “,” and values of each rows are separated by “|”.Wish the final result looks like that:“1, 2 | 3, 4 | 5, 5 | 6, 7 | 8, 9 | 12, 0”Table:Location\XY Lan Long Place1 1 2 Place 2 3 4 Place 3 5 5 Place 4 6 7 Place 5 8 9 Place 6 12 0  The data is located in the parameter(cityID, XY). Where CityID corresponds to list of cities, and XY has two possible values “Lan” and “Long”.Thank you for your help :)Cheers,

Hello,I´m pretty new to Aimms. I tried to learn to create a Gantt Chart. So I downloaded th example and copied every step in my own program.My question is where can I see the created Gantt Chart after running the program ? Thx

Hello,I have a problem with Aimms, I tried to program a Gantt Chart and a Calendar. For excercise I followed the Demos. So my question is after I wrote the program where can I see the Calendar or the Gantt Chart ?Do I have to use the widget or install some other extension ? Thx for your help

Hello, I have a short question. Is it possible to create a Gantt chart in the WinUi like in a Demoversion. If yes, how can I create one, its only possible for me with the WebUI.  Thx for your help! 

Hi, Is there any attribute which can ensure that only nondefault values are written to Excel?Like axll:WriteTable function has writeZeros argument and if it is set to 1 then zero cells will remain empty. Thanks,Lilla

Hello everyone,  Is there a way to use a discrete uniform distribution inside of Aimms? I know there is a uniform distribution but it gives me real number values for my parameter. Instead i just want integer values to be drawn from the uniform distribution. Is this possible?  Thank you for an answer. Kind regardsAlex

Hello everyone,  I have an Element Parameter PredecessorOperations(i_operation) that holds the value of the operation that has to be executed before i_operation. With the following statement i want to check if the EP has a value or not:  if (val(PredeccesorOperation(i_operation)) = 0) then….endif; However this only works if all values of the Ep are empty. If any operation gets assigned a predeccesor (e.g. Operation1) then i get the error: Cannot compute the value of string “Operation1”. If I would casually formulate the code it would look like this: if( PredeccesorOperation(i_operation) is empty ) then ….endif;So my question is: What operator do I need to use in order to check if the parameter has any value or no value assigned? I am thankful for any advice you might have. With kind regardsAndrew 

Hi folks,I’m doing some tutorials in AIMMS and I find that the data exchange library is missing from my AIMMS version. Can anyone point me how to install it? This is what I currently see: ThanksLS

Hi everybod,I have a quick question and hope you can help me.I calculate in my model the optimal stock level depending on the period and szenario specific demand.The inventory level is defined as follows: Inventory_PreviousPeriod + ProductionQuantity_CurrentPeriod (also a variable) - DeliveryQuantity_CurrentPeriod.How is it possible to preset the variable stock for the first period to a fixed inital value (in this case the opening inventory)?I would be very grateful for your answer!Best ragards, Hans

Hi everyone, I need to make a simulation in Aimms to simulate the mechanism on the following picture:   Order Release Mechanism I have no problem in declaring all the sets and parameters, but my main 2 problems are too make the periods pass correctly and repeat all processes in the periods and too update the loads and sets at the right points in time.  I have too do this via simulation so without an objective function thats also something that throws me off cause i cant use a Mathematical Programm so solve this.  Maybe the solution is simple but i havent ever worked with Aimms and that is a very big project for me, which is also very urgent so i really appreciate any help i can get.  With kind regards AlexPS.: The programm i made so far is attached as a zip-file. Maybe u can tell me how i need to adapt it to make it work. 

Dear all,  I am fairly new to Aimms, but for my thesis i need to solve a model in Aimms that has no objective function. Its like a scheduling problem, but it must not be optimization based.  So i have most parts of my Model but i dont no how to implement it since i cant use constraints and the solver. One Idea i had was to just make an irrelevant Objective function, let the Solver solve it and have my other parameters (Which Order goes to what station at what time and what is the capacity at each station) as results of the simulation. Would this work or is there any other way i can set this up properly? Thank you in advance. With kind regards, Andrew

Dear all,I'm quite new to Aimms, therefore I don’t know if my problem is easy to solve or a difficult one. My end goal is to be able to generate an automated production planning for a big pizza bakery. The machine shop scheduling example is in the direction for what I’m looking for, see the link below. https://how-to.aimms.com/Articles/473/473-ProductionPlanning-machinescheduling.htmlThe machine shop scheduling example determines the optimal machine and start time for each order, so that the makespan is minimized. I want to expand this model, so that more contraints can be added. An important binary variable for me is ‘DoYouHaveProductionInAPeriod(i,o,i_hc)’: do you have production at a certain machine i, for a spefic order o, at a certain time period i_hc. An example of a constraint that I want to add and using the variable ‘DoYouHaveProductionInAPeriod(i,o,i_hc)’ is if I have 4 workers available, only 4 machines can run at the same time → for each i_hc, sum((i,o),DoYouHaveProductionI

Hello everyone,  I have a problem in the following part of my code: (Right now it can happen for an order j that a part gets released cause station 1 has some load left, but all other parts dont get released , cause on these stations there is no load left. if(CurrentWorkloadOnStation (i) + WorkloadIfOrderGetsReleased(j,i) <= WorkloadNormOfWorkstations) then            CurrentWorkloadOnStation(i) := CurrentWorkloadOnStation(i) + WorkloadIfOrderGetsReleased(j,i);  What i want the If-statement to do is basically :if(CurrentWorkloadOnStation (Station1) + WorkloadIfOrderGetsReleased(j,i) <= WorkloadNormOfWorkstations AND CurrentWorkloadOnStation (Station2) + WorkloadIfOrderGetsReleased(j,i) <= WorkloadNormOfWorkstations AND on Station 3 etc) then…. I am thankful for any tips on how to implement this.  With kind regards Alex

Hello everyone, in my Simulation i have a Set Full of Orders which have to be released. I want to shift the Elements from the Set “Order Pool” to the Set “Orders in Production” and once finished to the Set “FinishedOrders”.  I would like to know how to put Elements from one Set into another Set when a certain condition is fullfilled.  Can anyone help me with that problem. Kind regardsAlex

Hi AIMMSians,I have formulated an NLP model with around 2500 variables and it is non-convex. When I solve it using IPOPT, I get the error “Intermediate Infeasible, terminated by solver”. When I use CONOPT as solver, I get same error. Analyzing the listing iteration log files, it reveals that solver labelled the solution as infeasible because the convergence is too slow as demonstrated by message in the end of listing iteration log “Convergence is slow and a derivative is discontinuous”. Please note that sometimes, the same model reached a “local optimal” with sensible values for the variables. With some nice information in AIMMS documentation, forum and webinar, I have tried scaling option, good initial points (which are not possible in every case) and a bit of reformulation by removing some variables acting as intermediate variables between two variables to calculate some values. None of these options have proved any change in the results. Any idea or word is highly appreciated. Thank

Hello everyone, for my model i need multpile periods, where in each period i can go through the procedure of order release. In order to do that i followed the “Aimms Professional Tutorial” and created a Horizon and a Calendar. But when i want to run the procedure “LinkHorizonToCalender” i get the following error message: The current period value 'period-01' is not an element of horizon "ModelPeriods". I dont know why or how to fix this problem. Can anyone help me with that?Kind regards Alex

Dear Community, we want to be able to edit multiple cells of a WebUI table, like using shift or ctrl to celect the cells and later edit them at once. We would like to be able to use copy paste as well. We coundn't find any resources describing a way of enabling these functions. If you know how to do it, or have some helpful resources please share it with us.

Hi everyone,I have been trying to call an AIMMS (academic license) procedure from python although this doesn't seem to work. I got the following code from another thread, which seems to work with a paid license. I also saw on another post that the academic licence might have some limitations in this regard. Is there an API in another language, were I can make Python wrapper around this other language?orIs it possible that AIMMS internally allows to run scripts in some language, in which case a script can be built  in such a way that they exchange model parameters/inputs/results with the outside world? Best regards,

Good day people….i am new to AIMMS. I want AIMMS to read from a dat file but it keeps giving me the  statement “The symbol ";" is not expected.” The content of the dat file is  COMPOSITE TABLE:G  M P R_M R_P!-------------10 8 4 10  15 ; after removing the symbol ; it pops up another error which is ‘The symbol "15    " is not expected.’after removing 15, it pops up another error which is ‘The symbol "10     " is not expected.” Is there something i am not getting right on how to structure the contents in dat file. Kindly help please.  

In version 4.71.4, I tried to use the LastUsedColumnNumber, and as the name already gives away it returns a number while I had hoped for a column name in the range of 1 to “ZZZ” like the ones that Excel uses. This would make it easier to also used it in the column/data range definition when reading data.Can anyone advice on how to easily/efficiently translate this?Thanks in advance!

Hello, For a university project we use AIMMS to solve a model, we also would like to use the WEB UI, however after building the WEB UI it does not save. Why does it not save, is it because we have an academic license? In the AIMMS model the module 'AIMMSWEBUI [read only]' has the property no save, however since it is read only, we are not able to change it. Is there a solution for this problem?Kind regards!

Hello everyone!Is it possible to remove the default stroke color (black) when user clicks or selects any node/location which has already defined stroke color? This is so that the customized stoke colors (defined in model) for the nodes remain functional even when any node is selected. I see customized stroke colors appear back when clicked twice on any node.In my case, by clicking on any location, the stroke colors are turned off and default stroke color black turns on. By clicking on same location again, we can see all stroke colors for potential locations(orange) and optimal location(red). Please find attached screenshots for reference.  Thanks in advance for help on this case!

Hello everybody,I have a little question regarding an optimization problem. In the problem I define my binary variables by use of two sets (matrix). Rows: Set 1, Columns: Set 2.The first set contains different parts (Set1 contains: Part 1, Part 2, Part 3… and so on)The second set contains different variants for each part (Set 2 contains: Version 1, Version 2, Version 3 and so on).The definition of the indices is no problem. Later in the model I want to use not the whole Matrix (Set1 X Set2) but just a Single vector. For example the vector should have the size of Set 1, and of Set 2 just the colum Version 2. So in the constraint I just want to use the yellow colum. Is this possible or do I have to define for every Element of Set 2 an own Set?  

Hello everyone,  In the problem that I have to solve, I have got two sets: j (=1, …, 5) and k (=1, …, 9). I also have a parameter: parameter(j,k) and I want that j begins from 2 (and not from 1) for this parameter. How do I put it in AIMMS? Moreover, in my objective function I want to minimize the sum of my costs but for j >= 2. My current formula looks like this: sum[j, 200*W(j)]     with W(j) a variableHow do I specify that I want j to be larger or equal than 2? Thank you

Hi, I have a String Parameter with index domain “i” called “ModPrefix” containing prefixes of modules within my project. Each of this modules has a variable with the name “Q”. Now, I would like to access these variables within the definition of a Node called “FacilityNode” likeNetOutflow = ModPrefix(i)::QHowever, this leads to the errorThe identifier "Q" has not been declared, but it is declared in the modules [...].where I replaced the names of the modules with “[...]”. My idea of a workaround was an if-then-else-statement likeNetOutflow = if ( ModPrefix(i) = "prefix1" ) then prefix1:Q elseif ( ModPrefix(i) = "prefix2" ) then prefix2:Q else 0 endif;in the case of two modules with prefixes “prefix1” and “prefix2”. However, I would still like to know if there is a way to circumvent it-then-else-statements, since they become ugly in the case of many modules.