Skip to main content

WebUI

Get and give help with AIMMS WebUI.

  • 204 Topics
  • 568 Replies
204 Topics
M
m.dwiantoExplorer
asked in WebUI
Adjust column width for table inside webui tabbed page widget

Is it not always possible to adjust column width of a table inside tabbed page. it can be adjusted when accessed through the page itself. is there a way to enable the column width adjustment from tabbed page widget?

191
Edo Nijmeijer
AIMMSian
Edo Nijmeijer
AIMMSian
Edo NijmeijerAIMMSian
posted in WebUI
Upcoming (font) styling changes that might influence your WebUI apps and the applicability of custom CSS

This week (with feature release 25.2.1) we will be releasing a change that is both big and small at the same time: we will stop using the Roboto, Roboto Condensed and Montserrat font families for WebUI and migrate to a font family known as Inter. These changes are part of our ongoing desire to keep WebUI's appearance up-to-date and to offer a better User Experience. They mark the start of a range of other changes, to the look-and-feel but also to how you can use WebUI, that should all achieve this same goal.Inter comes with some advantages, for you as an end-user of WebUI: Using Inter for the entirety of the UI will result in a more consistent look, making WebUI a more balanced experience, also for app developers. Inter was designed to feel modern and has features to enhance and adapt readability depending on the font size and weight. Inter can be delivered to your browser from fewer and smaller files, resulting in the best possible page loading performance. Despite all these large

650
Edo Nijmeijer
AIMMSian
Chris Kuip
AIMMSian
Chris KuipAIMMSian
published in WebUI
Exit AIMMS WebUI applicationHow-to

At User Support we occasionally get questions about the termination of WebUI sessions; for instance as follows:We have a project where the premaintermination and maintermination both contain the statement “return 1”.Separately, we have a library in which we want to run some checks and empty some parameters in the library pre termination. However, we observe that when the app is uploaded, the PreLibraryTermination and LibraryTermination are not ran.We’ve noticed this because when re-opening the same app within a few minutes, the data session is still active, and parameters that should be empty because we empty them both in the library initialization and termination, still contain data. Understandably, if you are not aware of the termination protocol of AIMMS WebUI sessions, this can be confusing.Let me share some details about the termination protocol for an AIMMS WebUI session first:Background: An AIMMS WebUI session consists of two communicating processes: A process in the browser of

1964
Chris Kuip
AIMMSian
A
AIMMSUserExplorer
asked in WebUI
Display name or index of the task in gantt chart

Hi, I created a gantt chart that to display p_taskStartTimePerEmployee(i_task,i_employee)p_taskDurationPerEmployee(i_task,i_employee) How can I show the task number or name on top of each task bar like the in the below photo (this photo taken from aimms help not my model)? For example I'm interested in showing i_task value on top of each task bar.thank you inadvance  

572
A
C
ccfcuentoEnthusiast
asked in WebUI
MAP FILTERING THROUGH MULTISELECT

Hello everyone!I’m reaching out to know how can I use multiselect in showing nodes and arcs in my network map. It is part of my project to make the UI interactive, however, I’m having difficulty doing so. I have tried testing if the same multiselect-table interaction can also work here, but it doesn’t. Any tips or examples you can provide?Thank you!

11012
Chris Kuip
AIMMSian
gdiepen
AIMMS Champ
gdiepenAIMMS Champ
asked in WebUI
Possibility to assign specific colors to gantt-chart jobs based on the standard palette

When displaying a gantt chart, the colors of the jobs come from the standard 16 color palette as far as I can see.For example, when I have a gantt chart defined on pGanttChartJobStart(iJob, iSku, iLine) and pGanttChartJobDuration(iJob, iSku,iLine) and in the gantt chart the iLine is corresponding to the resources and the combination (iSku, iJob) are corresponding to the jobs.If I understand it correctly, AIMMS will take the coloring from the first component in the Jobs section, which is exactly what I want (i.e. every job for a given sku always has the same color, namely the ‘sku’ color) However, sometimes, this results in two jobs that are consecutive on one line, but have colors that are quit close to eachother.I know I can easily create my own annotations and define my own colors for that with CSS, but then I will have lost the connection to the standard aimms palette. Do you know if it is possible to define custom annotations and in the CSS for those annotations indicate you want t

323
gdiepen
AIMMS Champ
D
AIMMS Partner
danileidelmeijerAIMMS Partner
asked in WebUI
Reset default WebUI table filtering

Hi community,I’ve noticed that the WebUI filtering applied to table widgets persists through AIMMS PRO sessions (even if they are closed). Is this filtering user dependent and is there a way to reset this default filtering of a deployed AIMMS PRO app?Thanks!Dani

403
D
AIMMS Partner
C
ccfcuentoEnthusiast
posted in WebUI
My WebUI suddenly disappeared

Hello, I am in need of urgent help because my entire WebUI is gone because of an error code for grid sizing, do you know how can I address this?

371
Chris Kuip
AIMMSian
J
JoostAce
asked in WebUI
Question on status of a few topics for WebUI

Hi all,I’ve seen here and there some things mentioned on the following items below, but I lost track on the latest developments. Can someone share a status update on them?Have the capability to specify file decimals per identifier (instead of per widget) ? Support for unit (parameters) in WebUI ? Library support for WebUI , i.e. that some WebUI parts / pages become shareable across different AIMMS apps Visible/hidden option per identifier in widget settingsDepending on this I might post an improvement idea for the backlog.Thanks,Joost 

15311
Madhu Krishnappa
AIMMSian
Paulus
AIMMS Partner
PaulusAIMMS Partner
asked in WebUI
Why is there no download / upload case function in the WebUI data manager

Our users want to be able to store case files locally on their computer and reupload to the cloud environment at a later stage. It looks like the WebUI data manager does not support this requirement. What is the best way to enable users with such a feature?

924
Paulus
AIMMS Partner
gdiepen
AIMMS Champ
gdiepenAIMMS Champ
posted in WebUI
Modify tooltip when changing job in gantt chart

In the gantt chart, you can set a custom tooltip when the user is hovering over each of the jobs. Is it also possible to customize the tooltip that is shown when you modify one of the jobs? In one of my demos, it shows the following: but what I want in that tooltip is actually the current start and end times also (basically, my own custom string parameter) The same would be for not changing the size of the job, but dragging the position left-right. 

361
Edo Nijmeijer
AIMMSian
D
AIMMS Partner
danileidelmeijerAIMMS Partner
asked in WebUI
Chrome WebUI option greyed out

Hi community!Having installed AIMMS 24.4.3.3 (x64) on a new laptop running Windows 11, I am unable to select (latest version of) Chrome as the default browser for WebUI, even though Chrome is set as my default browser in Windows 11. I am a bit puzzled as to how to solve this issue. Any help is much appreciated here!In the pic below I haven’t been able to make a good screenshot but only Edge option is enabled, Chrome is disabled. Thanks! 

375
Edo Nijmeijer
AIMMSian
R
robbEnthusiast
asked in WebUI
Which rows in webui table are in filter?

I have a table in WebUI which can be filtered through the table. The user can interact with the table to select rows associated with certain plants, for example. I would then like the user to be able to select a button to automatically check a check box for the visible rows. There could be many rows and selecting each row individually is not desired. How, in WebUI, can I tell which rows are visible after the user applies filters?

262
R
G
gorkemAce
posted in WebUI
How to Get the Corner Coordinates of the Visible Map

Hi,I basically need the corner coordinates of the visible map in the Map Widget. Please see the red dots below:  These coordinates will be needed when an action is triggered (e.g., a button is pressed), so they don’t need to be tracked continuously.Thanks.

964
Edo Nijmeijer
AIMMSian
B
Bui Trung-HiepEnthusiast
posted in WebUI
Problems with WebUI

Dear all,I’m new to AIMMS WebUI. I don’t know why my browsers (Chrome and Edge) can not display the WebUI properly (the left panels).After creating the Widgets, I can not add them to the Pages.Would you please provide me some solutions?Best regards, 

523
gabiservidone
Administrator
G
gorkemAce
posted in WebUI
Select Multiple Nodes in the Same Node Set on a Map Widget

Hi,Suppose I have a node set “Customers”. I would like to be able to select multiple customers (by drawing a circle around them or by selecting one by one using ctrl+click, etc.) and calculate the total demand (or do any action) for only the selected customers.Is there a way to do it?Thanks.

251
gabiservidone
Administrator
Madhu Krishnappa
AIMMSian
Madhu KrishnappaAIMMSian
published in WebUI
Widget Named Views - Give your user multiple data visualization options in one widget!Widget Named Views

We have learned that app developers can improve efficiency by offering a single widget with multiple predefined views, rather than using multiple instances of the same widget for different data representations on a page.Introducing the Widget Named Views feature, initially introduced in AIMMS 4.95.1 and further enhanced in AIMMS 4.96.1, app developers now have the ability to create and provide various views of a widget.For instance, this feature allows you to offer a table view with one pivoting and another view with a different pivoting, all within the same widget. Additionally, you can even add a different widget type, such as a bar chart, as another view.App developers have the flexibility to specify the default view that users see when they first load the page. Furthermore, they can dynamically adjust the presented view based on user interactions with the app.When multiple named views are created for a widget, a new button is added to the widget's header section. By clicking on thi

923
A
G
gorkemAce
asked in WebUI
Changing the data color in table regardless of being editable or not

As you know, cell values are shown black when they are read-only and blue otherwise as given below. I would like to be able to set a specific text color, regardless of whether it is read-only or not. I wonder if there is a way to do it?P.S. I know we can change the background color in a cell with annotation but there are times where I need to change both the background color and the text color.

643
gabiservidone
Administrator
G
gorkemAce
asked in WebUI
Conditionally Making a Side Panel Active or Hidden

Hi Folks,I have a string parameter sp_CommonButtonsStatus which is defined as either “Active” or “Hidden” based on a simple if-else condition and I want to use it to determine the state of a side panel as follows:data { ( 1, displayText ) : "Common Actions", ( 1, pageId ) : "common_buttons", ( 1, tooltip ) : "Common Actions", ( 1, icon ) : "aimms-play" , ( 1, state ) : "sp_CommonButtonsStatus"}Doesn’t work. Please tell me there is a simple way to do it, but I am missing it somehow 😁Best,Gorkem

441
G
A
ashokpoluu1Ace
posted in WebUI
Checkbox getting unchecked on navigating to other page 

Hi Everyone, i selected check button and navigated to another page.  Checkbox getting unchecked  once i came back to intial page.

273
gabiservidone
Administrator
F
felipebastarricaExplorer
asked in WebUI
Help needed with WebUI

Hi community,Hope everyone is doing great.This is the first time I work on a Web UI and I am struggling with certain configurations that should be straightforward. Would appreciate it if someone could help solve the following: See Image 1) When creating the table “Input Cost” the identifier names on the first column are not the same as in the parameters. How can I adjust them? I also want to change to zero decimals but cannot find how to do so.See Image 2) How can I add units ($) to this chart and table? I tried creating a Quantity Identifier in AIMMS (backend), but then I cannot add it to the parameters nor to the chart.See Image 3) How can I add the “Results” page to the Navigation?See Image 4) In this chart, there are 4 series. In the totals toolbar of the configuration of the chart, I added the Total Sum. Now I would like to view only the Total, and disregard the original series’. How can I do this?Thanks in advance.Best,Felipe​​

331
gabiservidone
Administrator
G
gorkemAce
asked in WebUI
Is there an equivalent/alternative in WebUI for the indexed page in WinUI?

Hi,In my case, each plant has a different set of tanks, and the user is able to select one plant at a time. Whenever user selects a plant, the inventory level over time for each tank in the plant is shown on a graph - and the graphs need to be placed on top of each other. This was a behavior that could be achieved in WinUI easily, by creating an Indexed Page object and identifying a parameter for the Index Rows.  I am wondering if there is a way to achieve the same behavior within WebUI?

16011
luispinto
AIMMSian
G
gorkemAce
asked in WebUI
Centering Title in Table Widget

Hi,This is what it is: And this is how I want it to look like: Seems like entering empty spaces at the beginning of the String doesn’t work. Any ideas on how to do it?

282
G
G
gorkemAce
asked in WebUI
Changing the fieldname for Sum only in one table

Hi,I want to be able to change the fieldname of “sum” to “Zone Total” for only one table widget, say tbl_demand. I know we can change it in the fieldname.properties file, but this changes it for all the tables. So, is there a way to do it for only one table?  

492
G
G
gorkemAce
asked in WebUI
Simply way to collapse/expand over aggregators as in WinUI?

Hi,Is there a way to collapse the data over the aggregator in WebUI as it could be done easily in WinUI by the red circled buttons given below?  

321
luispinto
AIMMSian
Click here to get AIMMS Community Edition
Terms & Conditions

Didn't find what you were looking for? Try searching on our documentation pages:

AIMMS Developer & PRO | AIMMS How-To | AIMMS SC Navigator